SUNIR-1a
SENSOR IRRADIATION SUNIR-1a
Irradiance measurement linear plate for SOLAR PUMPING application
The solar irradiation sensor SUNIR-1a is used to accurately measure the existing irradiation levels and perform a pumping by means of solar panels, regulating the pump accordingly.
The solar radiation sensor function also serves to provide the pump with mechanical protection against repeated starts without sufficient power..
The solar sensor function can also be used to activate external devices, such as electric generators or connect to the electricity grid, using the outputs of the EURA DRIVES inverter.
Each sensor is specially tested and calibrated for use with the EURA DRIVES pumping system, and can work with any of the pumping systems designed for the EM30, E2000 and EP66 series.
Technical characteristics:
- Open circuit voltage: Voc = 10.0 V
- Wire size: 2 x 1.5mm², 0,6Mts waterproofed
- Install in the same place and on the same plane as the solar panels.
- Does not require auxiliary power.
- Meets CE requirements
- Dimensions: 310x160x50 mm
- Weight : 0,6 Kgs
Connection example:
Linearity!
(Blue curve = SUNIR-1a measurement , Green curve = Measurement of a calibrated sensor!)
Ease of installation:
(To facilitate the interpretation of the installation mode, the sensor has been removed leaving only the bracket and the coupling)
Raised support from the underside of the solar panels
Raised support on the upper face of the solar panels
Linear fastening to the upper face of the solar panels
